The CANM8 CANNECT K2M is a dual CAN Bus interface that provides an accurate conversion from KMH to MPH. Specifically designed for use with imported vehicles featuring a KMH only speedometer, this interface will convert the speedometer from KMH to MPH using the vehicle’s CAN Bus system. This interface also features a speed pulse output on compatible vehicles.
Outputs
| Speed Signal | > | 12v square pulsed output at approximately 1 pulse per 1 MPH. |
N.B. Speed pulse output is not available for all vehicles.
Applications
The CANM8 CANNECT K2M requires no modification to the existing speedometer face as, after installation, the needle will be calibrated for MPH. For example, where it says 50 KMH on the existing dial, this will now be 50 MPH when the needle is pointing to 50. It is ideal for vehicles imported into the UK as it will allow the vehicle to be registered in the UK with the DVLA.
Please note that the CANM8 CANNECT K2M interface will only convert the speedometer dial from KMH to MPH. The vehicle odometer will remain in KM but will now clock up in miles.
Custom Applications
If you cannot find a product that meets your exact requirements, then please contact us directly as we specialise in designing custom software and will be happy to discuss your requirements further.
If you do not see your vehicle make model or year in the list below, please contact us directly as we may still be able to provide a solution for you.
Civic 2006 -
Civic 2012 -
Crossroad 2008 -
CR-V 2007 -
CR-V 2012 -
Freed 2008 -
Jazz 2008 -
Odyssey 2004 -
Odyssey 2008 -
Odyssey 2013 -
Stepwagon 2006 -
Stepwagon 2009 -
Stepwagon 2015 -
Sportage 2010 -
2 2007 -
2 2010 -
6 2008 -
6 2012 -
Biante 2008 -
CX-7 2007 -
Demio 2005 -
Demio 2014 -
MPV 2004 -
MX-5 2006 -
RX-8 (Delimit Only) 2005 -
Colt 2004 -
Colt 2009 -
Grandis 2004 -
i-CAR 2010 -
Lancer Evo 10 2008 -
Outlander 2007 -
Outlander 2012 -
350 GT 2003 -
350 Z 2003 -
370 GT 2009 -
Cube 2003 -
Cube 2009 -
Elgrand 2002 -
Elgrand (E52) 2011 -
GT-R 2010 -
Micra 2011 -
Micra 2013 -
Navara 2005 -
Pathfinder 2005 -
Skyline 350 GT 2002 -
Stagea (NM35) 2001 -
Tiida 2004 -
Tiida 2012 -
X-Trail 2004 -
X-Trail 2007 -
X-Trail 2014 -
Impreza 2007 -
Legacy 2004 -
Legacy 2009 -
Grand Vitara 2006 -
SX4 2006 -
Alphard 2008 -
Auris 2007 -
Auris 2010 -
Auris 2012 -
BB 2005 -
Estima 2000 -
Estima 2006 -
iQ 2008 -
iST 2006 -
Land Cruiser 2007 -
Prius 2004 -
Prius 2009 -
Prius 4 2017 -
Prius Plus 2004 -
Prius Plus 2009 -
Rav 4 2006 -
Rav 4 2013 -
Velfire 2008 -
Verso 2008 -
Yaris 2006 -
Yaris 2011 -
Installation Details
The interface features a mini wiring connector, which unplugs to allow easy installation. There are 4 connections to the vehicle CAN Bus wiring along with a connection to a permanent, fused 12v power supply and an earth connection.
The interface is connected onto the vehicle CAN Bus wires, usually located at the back of the speedometer, and can be installed by any competent auto electrician. Full vehicle specific installation instructions will be proivided with the unit so please state your vehicle Make, Model & Year in the box at checkout.
The interface incorporates a multi-function status LED, which indicates correct connection to the CAN system, CAN activity present and confirmation that the CAN identity has been recognised.
LED Status Details
 |
Flashing Red: Searching for CAN information. |
 |
Solid Red: CAN Data received but vehicle not yet identified. |
 |
Flashing Green: CAN Data received and vehicle type recognised. |
Wiring Harness Details
| Connect via a 5A fuse to a PERMANENT 12v supply. | ||
| Connect to a good chassis GROUND point. |
| CAN HI (Vehicle Harness Side) | ||
| CAN LO (Vehicle Harness Side) |
| CAN HI (Speedometer Plug Side) | ||
| CAN LO (Speedometer Plug Side) |
| Speed Signal Output : 12v pulsing (1 Hz = 1 MPH approx). |
N.B. Speed pulse output is not available for all vehicles.
Please state your Make, Model & Year of vehicle in the box at checkout so that we can provide you with the correct installation instructions for your vehicle
If you do not see your vehicle make model or year in the list below, please contact us directly as we may still be able to provide a solution for you.
Civic 2006 -
Civic 2012 -
Crossroad 2008 -
CR-V 2007 -
CR-V 2012 -
Freed 2008 -
Jazz 2008 -
Odyssey 2004 -
Odyssey 2008 -
Odyssey 2013 -
Stepwagon 2006 -
Stepwagon 2009 -
Stepwagon 2015 -
Sportage 2010 -
2 2007 -
2 2010 -
6 2008 -
6 2012 -
Biante 2008 -
CX-7 2007 -
Demio 2005 -
Demio 2014 -
MPV 2004 -
MX-5 2006 -
RX-8 (Delimit Only) 2005 -
Colt 2004 -
Colt 2009 -
Grandis 2004 -
i-CAR 2010 -
Lancer Evo 10 2008 -
Outlander 2007 -
Outlander 2012 -
350 GT 2003 -
350 Z 2003 -
370 GT 2009 -
Cube 2003 -
Cube 2009 -
Elgrand 2002 -
Elgrand (E52) 2011 -
GT-R 2010 -
Micra 2011 -
Micra 2013 -
Navara 2005 -
Pathfinder 2005 -
Skyline 350 GT 2002 -
Stagea (NM35) 2001 -
Tiida 2004 -
Tiida 2012 -
X-Trail 2004 -
X-Trail 2007 -
X-Trail 2014 -
Impreza 2007 -
Legacy 2004 -
Legacy 2009 -
Grand Vitara 2006 -
SX4 2006 -
Alphard 2008 -
Auris 2007 -
Auris 2010 -
Auris 2012 -
BB 2005 -
Estima 2000 -
Estima 2006 -
iQ 2008 -
iST 2006 -
Land Cruiser 2007 -
Prius 2004 -
Prius 2009 -
Prius 4 2017 -
Prius Plus 2004 -
Prius Plus 2009 -
Rav 4 2006 -
Rav 4 2013 -
Velfire 2008 -
Verso 2008 -
Yaris 2006 -
Yaris 2011 -
CANNECT Range
The CANM8 CANNECT interfaces are the latest development to our range of CAN Bus products, these products feature some unique advantages over general CAN Bus interfaces.
The most important feature of the CANNECT range is that they are updatable. The CANNECT product firmware is under continual revision to keep pace with the latest vehicle applications. The CANNECT update service is available to our trade and account customers and requires the purchase of our CANNECT-RUI Interface to access the latest software file downloads. Please enquire if you are interested in our CANNECT-RUI service and we will aim to assist you.
Another important feature is our Remote Support Service. The CANNECT-RUI is a dual function interface that not only provides the software update to the interface but can also be utilised by one of our engineers to remotely analyse new vehicle CAN systems or issues with existing compatibility. All that our customers require to benefit from this service is a laptop or notebook PC and a sufficient internet connection. We aim to rectify compatibility issues and offer compatibility to new vehicles within 1 hour of connection.
All CANNECT interfaces feature a bi-colour status LED that provides a clear indication of the interface operation. Most CANNECT products also feature direct compatibility with our contact-less CAN Bus reader to enable connection to the CAN system without any metal to metal contact.
The CANM8 CANNECT K2M is a dual CAN Bus interface that provides an accurate conversion from KMH to MPH. Specifically designed for use with imported vehicles featuring a KMH only speedometer, this interface will convert the speedometer from KMH to MPH using the vehicle’s CAN Bus system. This interface also features a speed pulse output on compatible vehicles.
Outputs
| Speed Signal | > | 12v square pulsed output at approximately 1 pulse per 1 MPH. |
N.B. Speed pulse output is not available for all vehicles.
Applications
The CANM8 CANNECT K2M requires no modification to the existing speedometer face as, after installation, the needle will be calibrated for MPH. For example, where it says 50 KMH on the existing dial, this will now be 50 MPH when the needle is pointing to 50. It is ideal for vehicles imported into the UK as it will allow the vehicle to be registered in the UK with the DVLA.
Please note that the CANM8 CANNECT K2M interface will only convert the speedometer dial from KMH to MPH. The vehicle odometer will remain in KM but will now clock up in miles.
Custom Applications
If you cannot find a product that meets your exact requirements, then please contact us directly as we specialise in designing custom software and will be happy to discuss your requirements further.
If you do not see your vehicle make model or year in the list below, please contact us directly as we may still be able to provide a solution for you.
Civic 2006 -
Civic 2012 -
Crossroad 2008 -
CR-V 2007 -
CR-V 2012 -
Freed 2008 -
Jazz 2008 -
Odyssey 2004 -
Odyssey 2008 -
Odyssey 2013 -
Stepwagon 2006 -
Stepwagon 2009 -
Stepwagon 2015 -
Sportage 2010 -
2 2007 -
2 2010 -
6 2008 -
6 2012 -
Biante 2008 -
CX-7 2007 -
Demio 2005 -
Demio 2014 -
MPV 2004 -
MX-5 2006 -
RX-8 (Delimit Only) 2005 -
Colt 2004 -
Colt 2009 -
Grandis 2004 -
i-CAR 2010 -
Lancer Evo 10 2008 -
Outlander 2007 -
Outlander 2012 -
350 GT 2003 -
350 Z 2003 -
370 GT 2009 -
Cube 2003 -
Cube 2009 -
Elgrand 2002 -
Elgrand (E52) 2011 -
GT-R 2010 -
Micra 2011 -
Micra 2013 -
Navara 2005 -
Pathfinder 2005 -
Skyline 350 GT 2002 -
Stagea (NM35) 2001 -
Tiida 2004 -
Tiida 2012 -
X-Trail 2004 -
X-Trail 2007 -
X-Trail 2014 -
Impreza 2007 -
Legacy 2004 -
Legacy 2009 -
Grand Vitara 2006 -
SX4 2006 -
Alphard 2008 -
Auris 2007 -
Auris 2010 -
Auris 2012 -
BB 2005 -
Estima 2000 -
Estima 2006 -
iQ 2008 -
iST 2006 -
Land Cruiser 2007 -
Prius 2004 -
Prius 2009 -
Prius 4 2017 -
Prius Plus 2004 -
Prius Plus 2009 -
Rav 4 2006 -
Rav 4 2013 -
Velfire 2008 -
Verso 2008 -
Yaris 2006 -
Yaris 2011 -
Installation Details
The interface features a mini wiring connector, which unplugs to allow easy installation. There are 4 connections to the vehicle CAN Bus wiring along with a connection to a permanent, fused 12v power supply and an earth connection.
The interface is connected onto the vehicle CAN Bus wires, usually located at the back of the speedometer, and can be installed by any competent auto electrician. Full vehicle specific installation instructions will be proivided with the unit so please state your vehicle Make, Model & Year in the box at checkout.
The interface incorporates a multi-function status LED, which indicates correct connection to the CAN system, CAN activity present and confirmation that the CAN identity has been recognised.
LED Status Details
|
Flashing Red: Searching for CAN information. |
|
Solid Red: CAN Data received but vehicle not yet identified. |
|
Flashing Green: CAN Data received and vehicle type recognised. |
Wiring Harness Details
| Connect via a 5A fuse to a PERMANENT 12v supply. | ||
| Connect to a good chassis GROUND point. |
| CAN HI (Vehicle Harness Side) | ||
| CAN LO (Vehicle Harness Side) |
| CAN HI (Speedometer Plug Side) | ||
| CAN LO (Speedometer Plug Side) |
| Speed Signal Output : 12v pulsing (1 Hz = 1 MPH approx). |
N.B. Speed pulse output is not available for all vehicles.
Please state your Make, Model & Year of vehicle in the box at checkout so that we can provide you with the correct installation instructions for your vehicle
If you do not see your vehicle make model or year in the list below, please contact us directly as we may still be able to provide a solution for you.
Civic 2006 -
Civic 2012 -
Crossroad 2008 -
CR-V 2007 -
CR-V 2012 -
Freed 2008 -
Jazz 2008 -
Odyssey 2004 -
Odyssey 2008 -
Odyssey 2013 -
Stepwagon 2006 -
Stepwagon 2009 -
Stepwagon 2015 -
Sportage 2010 -
2 2007 -
2 2010 -
6 2008 -
6 2012 -
Biante 2008 -
CX-7 2007 -
Demio 2005 -
Demio 2014 -
MPV 2004 -
MX-5 2006 -
RX-8 (Delimit Only) 2005 -
Colt 2004 -
Colt 2009 -
Grandis 2004 -
i-CAR 2010 -
Lancer Evo 10 2008 -
Outlander 2007 -
Outlander 2012 -
350 GT 2003 -
350 Z 2003 -
370 GT 2009 -
Cube 2003 -
Cube 2009 -
Elgrand 2002 -
Elgrand (E52) 2011 -
GT-R 2010 -
Micra 2011 -
Micra 2013 -
Navara 2005 -
Pathfinder 2005 -
Skyline 350 GT 2002 -
Stagea (NM35) 2001 -
Tiida 2004 -
Tiida 2012 -
X-Trail 2004 -
X-Trail 2007 -
X-Trail 2014 -
Impreza 2007 -
Legacy 2004 -
Legacy 2009 -
Grand Vitara 2006 -
SX4 2006 -
Alphard 2008 -
Auris 2007 -
Auris 2010 -
Auris 2012 -
BB 2005 -
Estima 2000 -
Estima 2006 -
iQ 2008 -
iST 2006 -
Land Cruiser 2007 -
Prius 2004 -
Prius 2009 -
Prius 4 2017 -
Prius Plus 2004 -
Prius Plus 2009 -
Rav 4 2006 -
Rav 4 2013 -
Velfire 2008 -
Verso 2008 -
Yaris 2006 -
Yaris 2011 -
CANNECT Range
The CANM8 CANNECT interfaces are the latest development to our range of CAN Bus products, these products feature some unique advantages over general CAN Bus interfaces.
The most important feature of the CANNECT range is that they are updatable. The CANNECT product firmware is under continual revision to keep pace with the latest vehicle applications. The CANNECT update service is available to our trade and account customers and requires the purchase of our CANNECT-RUI Interface to access the latest software file downloads. Please enquire if you are interested in our CANNECT-RUI service and we will aim to assist you.
Another important feature is our Remote Support Service. The CANNECT-RUI is a dual function interface that not only provides the software update to the interface but can also be utilised by one of our engineers to remotely analyse new vehicle CAN systems or issues with existing compatibility. All that our customers require to benefit from this service is a laptop or notebook PC and a sufficient internet connection. We aim to rectify compatibility issues and offer compatibility to new vehicles within 1 hour of connection.
All CANNECT interfaces feature a bi-colour status LED that provides a clear indication of the interface operation. Most CANNECT products also feature direct compatibility with our contact-less CAN Bus reader to enable connection to the CAN system without any metal to metal contact.
You have no items to compare.
You have no items to compare.
