This professional style parking system comprises of 4 sensors pre-mounted in to a slim line plastic housing. The housing is ideal for surface mounting to the rear of the vehicle. The parking system is primarilly designed for installation to the rear of the vehicle and powered via the vehicles reversing lights wiring so that operation is automatic when the vehicle is placed in reverse gear.
This system features a specially designed electronic control unit which has an internal radio transmitter. The audible response from the sensors is generated from a cigarette lighter style plug-in receiver, incorporating a speaker with volume control. These features make this kit ideal for installation to Commercial Vehicles, Motorhomes, Caravans and Trailers.
This item features black faced sensors mounted in to a black durable plastic housing.
Alternative products
Operation
The system switches on automatically when reverse gear is selected. An audible tone sounds to confirm operation. Obstructions at the rear of the vehicle are detected approximately 1.5 meters away and indicated by a pulsing audible tone. As proximity to the obstruction is increased, the tone pulses at a faster rate. A continuous tone is produced when the obstruction is approximately 30cm from the vehicle.
Please note: The above stated distances are an approximation of performance only. Actual performance may vary slightly depending upon the quality and style of installation.
This item comprises of
- Sensor bar with 4x18mm sensors.
- Remote audible warning unit.
- Fixing Hardware
- Installation & Operation Guide
Approximate Sensor Bar Dimensions
- 1550 mm (W) x 56 mm (H) x 26 mm (D)
Installation service
Please click here for details of our installation service.
Please note: Parking systems are designed only as a driving aid. They should not be considered to replace care and attentiveness while driving!
|
