This professional style parking system comprises of 4 sensors which are designed to be integrally mounted to the vehicle front bumper. The sensors are automatically switched on when vehicle speed is detected and switched off as soon as the vehicle speed exceeds 6 MPH.
This 4 sensor kit is suitable for installation to medium or large cars and Light Commercial Vehicles. The sensors can be painted to colour match the bumper without affecting the performance of the system and are suitable for installation to metal bumpers.
To check if this system is compatible with your vehicle, please click the 'Download PDF' link on the left, or contact us if your vehicle is not listed or for further information.
Operation
Installed to the front of the vehicle, the system switches on automatically when vehicle speed is detected. Obstructions at the front of the vehicle are detected approximately 1.5 meters away and indicated by a pulsing audible tone. As proximity to the obstruction is increased, the tone pulses at a faster rate. A continuous tone is produced when the obstruction is approximately 30cm from the vehicle.
Please note: The above stated distances are an approximation of performance only. Actual performance may vary slightly depending upon the quality and style of installation.
This item comprises of
- 4 x 16mm flush mount sensors.
- 3 different sets of sensor mounting frames.
- Miniature electronic control unit.
- CANM8-PULSE CAN Bus interface
- Audible warning unit with LED
- Installation & Operation Guide
Mounting Options
This kit is supplied with 3 different sensor mounts for varying installation requirements:
- 4 x Level external surface sensor retaining mounts. For installation in to bumpers which have a verticle surface.
- 4 x Angled external surface sensor retaining mounts. For installation in to bumpers which have an angled surface.
- 4 x Internal surface mounts. For a "Factory Fit" style appearance. These adhere to the inner bumper surface and hold the sensor face in position with out the need for outer surface retainers.
Please click here for details of our installation service.
Please note: Parking systems are designed only as a driving aid. They should not be considered to replace care and attentiveness while driving!
|
