The CANM8-TALK2 interface is a unique concept which reassigns the functionality of the steering wheel Mode Change button of compatible Vauxhall vehicles, to control the call functions of the Nokia CK-7W.
Compatibility
- Vauxhall Astra 2004 >
- Vauxhall Signum 2004 >
- Vauxhall Vectra 2004 >
- Vauxhall Zafira 2004 >
Functionality
With the interface installed, the lower left Audio Mode Change button of the steering controls is reassigned to function as the call button for the Nokia CK-7W Bluetooth phone kit. During a call, the audio volume steering control (usually a 'wheel' type control on the right of the steering wheel) is used to adjust the caller conversation volume and will not effect the audio volume level. Control of the audio volume is returned to the switch as normal after the call has ended.
Steering Controls Summary
- To answer an incoming call - press the Mode Control Button once.
- To terminate a call - press the Mode Control Button once.
- To make a call using Voice Tags - press the Mode Control Button until the Voice Tags Request Jingle is heard and then release the button.
- Last Number Redial - press the Mode Control Button twice.
- To increase caller conversation volume - move the Audio Volume Control Wheel up.
- To decrease caller conversation volume - move the - Audio Volume Control Wheel down.
Installation
The CANM8-TALK2 interface is supplied ready for wire to wire connection at the rear of the audio unit, a 'Plug & Play' version of the interface is also available here. The interface has four connections to the CAN Bus system and three further connections to the permanent 12v, ground and mute connections at the rear of the radio.
A powering loom plug is supplied from the interface which connects directly to the CK-7W control unit. Similarly, a function control lead replaces the standard CK-7W rotary control switch lead - the standard control switch is not required with this installation. The speaker output from the CK-7W connects directly to the phone input connections at the rear of the radio to complete the installation.
Caller conversation volume is reproduced via the vehicles front speakers. There is no need to install the standard speaker which comes complete with the CK-7W kit. Complete installation instructions are supplied with the interface.
The CK-7W is automatically switched 'on' and 'off' by the interface, by sensing the vehicle ignition switch operation from the CAN Bus. No additional electrical connections are required.
Please note, the Nokia CK-7W kit is not supplied with this item but is available seperately here.
When ordering this product, please advise us in the 'Comments Box' at the Checkout, your vehicle make, model and year of manufacture.
|
